BMC 9010 is specifically formulated for injection molding of automotive lamp. BMC 9010 has high rate of finish products, excellent surface profile for basecoat adhesion, high reflecting light and overall aesthetics of the molded part after metallization. Widely used in high quality headlamp reflector.
Property | Test Method | Unit | Value |
Physical and Mechanical Properties: | |||
Impact Strength | ASTM D256 | J/m | 136 |
Flexural Strength | ASTM D790 | MPa | 98 |
Flexural Modulus | ASTM D790 | GPa | 10.2 |
Tensile Strength | ASTM D638 | MPa | 35.6 |
Compressive Strength | ASTM D695 | MPa | 100 |
Water Absorption | ASTM D570 | % | 0.12 |
Specific Gravity | ASTM D792 | g/cm3 | 1.98 |
Shrinkage | ASTM D955 | % | 0.03 |
Hardness | ASTM D2583 | Barcol | 68 |
Electrical Properties: | |||
Dielectric Strength | ASTM D149 | KV/mm | --- |
Arc Resistance | ASTM D495 | Second | --- |
Thermal & Flame Retardant Properties: | |||
Heat Deflection Temperature @ 264PSI | ASTM D648 | ℃ | ≥200 |
Flame Resistance | UL94 |
| --- |
